|
|
CAPACITY |
PART # |
 |
100 tons 100 Ton Capacity Modified TDM-200 Skate has
1 1/2" hardened alloy axles with sealed bearings and special
outboard thrust washers. These skates were designed for one of our
customer to be used as part of a carousel unit that will deploy
heavy duty cable on the ocean floor. |
Modified Skate Serial #27093
Call for price and availability
|
|
|
|
|
 |
50 tons 50 Ton Capacity Modified BB-100 Skate with
guide rollers that are fixed to run on a 10" x 2" track plate. The
United States Air Force Test Lab uses these in conjunction with a
moveable reaction structure on their munitions test range. It also
incorporates large handles that make it easy for lifting with or
without gloves. |
Modified Skate Serial #26837
Call for price and availability
|
|
|
|
|
 |
30 tons 30 Ton Capacity Modified ST-1060 Skate with
guide rollers that are adjustable from 7" to 15". The standard
cleats have been removed from the skate at the request of our
customer. It also incorporates large handles that make it easy for
lifting with or without gloves. |
Modified Skate Serial #26785
Call for price and availability
|
|
|
|
|
 |
7.5 tons 7.5 Ton Capacity Modified TDM-4 Skate with
guide rollers that are adjustbale from 4" to 8 1/2". These skates
are used on 6" wide I-beams to move large pieces of piping by a
large contractor here in the United States. |
Modified Skate Serial #26757
Call for price and availability
|
|
|
|
|
 |
30 tons 30 Ton Capacity Wire Reel Transport Cart. The
application that this device is used for is to transport 158"
diameter wire reels from one part of a manufacturing facility to
another.
It incorporates (2) SD-50 Hevi-Haul Skates to act as the rolling
mechanism. It is also equipped with a tow bar for moving. In this
instance, by attaching the tow bar to a fork lift. |
Custom Skate Serial #26206
Call for price and availability
|
|
|
|
|
 |
22 tons Custom 22 ton capacity skate with large 5"
diameter nylon rollers. This skate is 15 1/2" wide x 19" long and
features a solid steel enclosed frame with caulks on the deck
surface. Overall height of this skate is 6 1/2". The nylon rollers
are equipped with sealed roller bearings.
 |
22 tons (19958.4 kg) per skate |
|
|
|
|
Dimensions:
|
|
|
|
|
19"L x 15 1/2"W x 6 1/2"H |
|
|
|
|
Features:
|
|
|
|
|
-
(9) 5" diameter nylon rollers
|
|
|
|
|
-
Two press-fit sealed roller bearings
in each roller
|
|
|
|
|
-
1/2" thick steel frame construction
|
|
|
|
Custom Skate Serial #23271
Call for price and availability
|
|
|
|
|
 |
70 tons Custom skate kit with a total capacity of 70
tons on polyurethane coated rollers! The front swivel skate has a 30
ton capacity and has an attachable 48" long tow handle. The front
skate also has a swivel plate in the center which can tilt 5 degrees
in each direction. The rear two skates have a 20 ton capacity each
and are designed to be used with a spreader bar. Keep your load low
to the ground - overall height for the front swivel skate is 5",
Use a 1 1/4" diameter steel bar to spread the two
rear skates to your desired width. The spreader bar slips through
the center of the two rear skates and can be locked in place by
tightening the square head set screws. |
Custom Skate Serial #24838
Call for price and availability
|
|
|
|
|
 |
30 tons Modified Hevi-Haul ST-1060 Skate equipped
with cam followers and brackets for moving easily on I-beams. These
skates have a 30 ton capacity each. The guide rollers are adjustable
from 7" to 15" wide.
|
|
30 tons (27216 kg) per skate |
|
|
|
|
Dimensions:
|
|
|
|
|
21 1/2" L x 19 1/4" W x 4 1/2" H
(overall dimensions with guide rollers
and brackets) |
|
|
|
|
Features:
|
|
|
|
|
-
(6) 3 1/4" diameter steel rollers
|
|
|
|
|
-
(3) 11 3/4" hardened steel axles
|
|
|
|
|
-
(4) 2" diameter cam followers (guide
rollers) and brackets which are
adjustable to accept a 7" to 15"
I-Beam
|
|
|
|
|
-
3/8" diameter steel rod between cam
follower brackets to make a lift
handle
|
|
|
|
Modified Skate Serial #23109
Call for price and availability
|
|
|
|
|
 |
25 tons 25 ton capacity modified Hevi-Haul UM-HD-50
roller dolly. Features a custom top with steel rails and bolt holes
for mounting to the base of an existing machine. The four center
rollers are polyurethane coated and the two end rollers are steel
for floor protection. |
Modified Skate Serial #24692
Call for price and availability
|
|
|
|
|
 |
Modified HM-50 Skate. Modifications on this skate
include a larger diameter carrying handle and larger diameter guide
rollers. The guide roller brackets on this skate have two holes for
the cam followers rather than one large slot for sliding the guide
rollers to fit different size I-beams. This particular skate was
desiged to run on 12" and 16" I-beams only. |
Modified Skate Serial #23546
Call for price and availability |